HY-2B卫星散射计海面风场产品质量分析 *     

陈克海  解学通  张金兰  邹巨洪  张毅 《热带海洋学报》2020,39(6):30-40

星载微波散射计是获取全球海面风场信息的主要手段, HY-2B卫星散射计的成功发射为全球海面风场数据获取的持续性提供了重要保障。本文利用欧洲中期天气预报中心(European Center for Medium-Range Weather Forecasts, ECMWF)再分析风场数据、热带大气海洋观测计划(Tropical Atmosphere Ocean Array, TAO)和美国国家数据浮标中心(National Data Buoy Center, NDBC)浮标获取的海面风矢量实测数据, 对HY-2B散射计海面风场数据产品的质量进行统计分析。分析表明, HY-2B风场与ECMWF再分析风场对比, 在4~24m·s^-1风速区间内, 风速和风向均方根误差(root mean square error, RMSE)分别为1.58m·s^-1和15.34°; 与位于开阔海域的TAO浮标数据对比, 风速、风向RMSE分别为1.03m·s^-1和14.98°, 可见HY-2B风场能较好地满足业务化应用的精度要求(风速优于2m·s^-1, 风向优于20°)。与主要位于近海海域的NDBC浮标对比, HY-2B风场的风速、风向RMSE分别为1.60m·s^-1和19.14°, 说明HY-2B散射计同时具备了对近海海域风场的良好观测能力。本文还发现HY-2B风场质量会随风速、地面交轨位置等变化, 为用户更好地使用HY-2B风场产品提供参考。  相似文献   

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode     

Shengming Hu  Zhijian Chen  Chenghui Wan  Chun Tang  Wen Xiong 《Marine Georesources & Geotechnology》2020,38(4):385-392

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.  相似文献   

NaHSO3对两种微藻生长及胞外多糖和藻胆蛋白含量的影响     

梁英  闫译允  黄徐林  田传远  胡乃霞  王帅 《中国海洋大学学报(自然科学版)》2020,(1):21-29

本文研究了0.25~3 mmol/L浓度的NaHSO3对紫球藻(Porphyridium violaceum)和0.06~0.96 mmol/L浓度的NaHSO3对蓝隐藻(Chroomonas placoidea)的叶绿素荧光参数(PSII最大光能转化效率Fv/Fm、相对电子传递速率rETR、光化学淬灭qP、非光化学淬灭NPQ)、细胞密度、干重、胞外多糖和藻胆蛋白含量的影响。研究表明,较低浓度的NaHSO3对紫球藻和蓝隐藻的生长及活性物质积累有促进作用,2种微藻进行生长和活性物质积累的最适NaHSO3浓度分别为0.5和0.12 mmol/L,此条件下,实验结束时,2种微藻的Fv/Fm、rETR、qP、细胞密度、干重、胞外多糖和藻胆蛋白含量均达到最大值,显著高于对照组。其中,紫球藻的最终细胞密度、干重、胞外多糖和藻胆蛋白含量分别比对照组增加了36.0%、19.1%、71.8%和69.0%。蓝隐藻的上述参数在NaHSO3浓度为0.12 mmol/L时则比对照组增加了60.8%、45.4%、60.0%和53.1%。另一方面,NaHSO3浓度为2~3 mmol/L时显著抑制紫球藻生长及活性物质积累,NaHSO3浓度为0.48~0.96 mmol/L则不利于蓝隐藻生长及活性物质积累。研究结果表明,适合紫球藻和蓝隐藻生长及胞外多糖和藻胆蛋白积累的最佳NaHSO3浓度分别为0.5和0.12 mmol/L,该研究为2种微藻的开发利用提供了理论依据。  相似文献   

厚碳酸盐岩覆盖区RVSP三维地震勘探应用效果分析     

胡小鹏 《山东国土资源》2020,36(5):38-43

该文以中国南方一厚碳酸盐岩覆盖区的RVSP三维地震勘探实例,对RVSP三维地震勘探观测系统和数据采集参数的确定、地面等效处理和波场分离等关键处理技术及地质效果进行了阐述和分析,说明了RVSP在克服表浅层复杂地质条件及环境条件对资料的影响及提高地震资料的分辨率有其特定的优势,同时也提出了RVSP三维地震在采集和处理过程中的难点。  相似文献   

频率域海洋可控源电磁垂直各向异性三维反演   总被引：1，自引：0，他引：1       下载免费PDF全文

彭荣华  胡祥云  李建慧  刘亚军 《地球物理学报》2019,62(6):2165-2175

地层宏观电性各向异性会对可控源电磁响应产生重要影响.由于海底地层电性结构常表现为电导率各向异性，若仅对海洋可控源电磁（MCSEM）数据进行常规各向同性反演，有可能无法获得准确的反演解释结果，从而削弱MCSEM技术的可靠性.本文实现了电导率垂直各向异性（VTI）条件下频率域海洋可控源电磁数据三维反演算法.其中，三维正演采用基于二次场控制方程的交错网格有限体积法，并利用直接矩阵分解技术来求解离散所得的大型线性方程组，有利于快速计算多场源的响应.反演采用具有近似二次收敛性的高斯牛顿算法对目标函数进行最优化.最后，对具有VTI电性各向异性特征的盐丘构造模型的MCSEM合成数据分别进行了电导率各向同性和垂直各向异性三维反演，结果表明：各向同性三维反演算法无法对受VTI介质影响的MCSEM数据进行正确的反演解释，而垂直各向异性三维反演能够获得更为可靠的地下电阻率结构和异常体分布，展现出对海底电性各向异性结构更为优良的反演解释能力.  相似文献   

CHARACTERISTICS OF SATELLITE GRAVITY FIELD AND SEISMOGENIC MECHANISM IN THE LONGMENSHAN FAULT ZONE          下载免费PDF全文

TANG Jing-tian  YANG Lei  REN Zheng-yong  HU Shuang-gui  XU Zhi-min 《地震地质》2019,41(5):1136-1154

Longmenshan fault zone is a famous orogenic belt and seismic zone in the southeastern Tibetan plateau of China. The Wenchuan M_S8.0 earthquake on May 12, 2008 and the Ya'an M_S7.0 earthquake on April 20, 2013 occurred in the central-southern part of Longmenshan fault zone. Because of its complex geological structures, frequent earthquakes and special geographical locations, it has attracted the attention of many scholars around the world. Satellite gravity field has advantages in studying gravity field and gravity anomaly changes before and after earthquake. It covers wide range, can be updated regularly, without difficulty in terms of geographical restrictions, and is not affected by environmental factors such as weather, terrain and traffic. Therefore, the use of high-precision Earth satellite gravity field data inversion and interpretation of seismic phenomena has become a hot topic in earth science research. In order to understand satellite gravity field characteristics of the Longmenshan earthquake zone in the southeastern Tibetan plateau and its seismogenic mechanism of earthquake disasters, the satellite gravity data was used to present the terrain information of the study area. Then, by solving the regional gravity anomaly of the Moho surface, the crustal thickness of the study area was inverted, and the GPS velocity field data was used to detect the crustal deformation rate and direction of the study area. Combining the tectonic setting of the Longmenshan fault zone and the existing deep seismic sounding results of the previous researchers, the dynamic characteristics of the gravity time-varying field after the earthquake in the Longmenshan earthquake zone was analyzed and the mechanism of the earthquake was explored. The results show that the eastward flow of deep materials in the eastern Tibetan plateau is strongly blocked at the Longmenshan fault zone. The continuous collision and extrusion process result in a "deep drop zone" in the Moho surface, and the long-term stress effect is conducive to the formation of thrust-nappe and strike-slip structures. The Longmenshan earthquake zone was in the large-scale gradient zone of gravity change before the earthquake, the deep plastic fluid material transport velocity differed greatly, the fluid pressure was enhanced, and the rock mechanical strength in the seismic source region was weakened, which contributed to the intrusion of crustal fluid and the upwelling of the asthenosphere. As a result, the continuous accumulation of material and energy eventually led to continuous stress imbalance in the deep part and shear rupture of the deep weak structure, causing the occurrence of the thrust-nappe and strike-slip earthquake.  相似文献   

APPLYING 3D INVERSION OF SINGLE-PROFILE MAGNETOTELLURIC DATA TO IDENTIFY THE SHADE AND YUNONGXI FAULTS          下载免费PDF全文

JIANG Feng  CHEN Xiao-bin  DONG Ze-yi  CUI Teng-fa  LIU Zhong-yin  WANG Pei-jie 《地震地质》2019,41(6):1444-1463

Many synthetic model studies suggested that the best way to obtain good 3D interpretation results is to distribute the MT sites at a 2D grid array with regular site spacing over the target area. However, MT 3D inversion was very difficult about 10 years ago. A lot of MT data were collected along one profile and then interpreted with 2D inversion. How to apply the state-of-the-art 3D inversion technique to interpret the accumulated mass MT profiles data is an important topic. Some studies on 3D inversion of measured MT profile data suggested that 2D inversions usually had higher resolution for the subsurface than 3D inversions. Meanwhile, they often made their interpretation based on 2D inversion results, and 3D inversion results were only used to evaluate whether the overall resistivity structures were correct. Some researchers thought that 3D inversions could not resolute the local structure well, while 2D inversion results could agree with the surface geologic features much well and interpret the geologic structures easily. But in the present paper, we find that the result of 3D inversion is better than that of 2D inversion in identifying the location of the two local faults, the Shade Fault(SDF)and the Yunongxi Fault(YNXF), and the deep structures. In this paper, we first studied the electrical structure of SDF and YNXF based on a measured magnetotelluric(MT) profile data. Besides, from the point of identifying active faults, we compared the capacity of identifying deep existing faults between 2D inversion models and 3D models with different inversion parameters. The results show that both 2D and 3D inversion of the single-profile data could obtain reasonable and reliable electrical structures on a regional scale. Combining 2D and 3D models, and according to our present data, we find that both SDF and YNXF probably have cut completely the high resistivity layer in the upper crust and extended to the high conductivity layer in the middle crust. In terms of the deep geometry of the faults, at the profile's location, the SDF dips nearly vertically or dips southeast with high dip angle, and the YNXF dips southeast at depth. In addition, according to the results from our measured MT profile, we find that the 3D inversion of single-profile MT data has the capacity of identifying the location and deep geometry of local faults under present computing ability. Finally, this research suggests that appropriate cell size and reasonable smoothing parameters are important factors for the 3D inversion of single-profile MT data, more specifically, too coarse meshes or too large smoothing parameters on horizontal direction of 3D inversion may result in low resolution of 3D inversions that cannot identify the structure of faults. While, for vertical mesh size and data error thresholds, they have limited effect on identifying shallow tectonics as long as their changes are within a reasonable range. 3D inversion results also indicate that, to some extent, adding tippers to the 3D inversion of a MT profile can improve the model's constraint on the deep geometry of the outcropped faults.  相似文献   

2008年汶川MS8.0地震电离层图像信息长时程演化初探     

宋程  张永仙  夏彩韵  张小涛 《地震》2019,39(2):135-146

应用改进的图像信息方法, 结合DEMETER电磁卫星的电子温度数据, 对2008年汶川M_S8.0地震进行了长时程的回溯性预测研究。 与以往的地震电离层演化图像提取异常的研究相比, 将其回溯的时程延长至震前近11个月, 并向震后延长48 d。 在长期连续的异常扰动演化图中, 出现了两个明显的异常时段, 且在震前2个月短期内异常扰动明显减弱并趋于背景值。 两个时段出现的异常扰动分布位置及其形态以及持续时间皆不重复, 这体现了前兆异常的不易确定, 难以定性及定量识别的特点。 电离层异常扰动特征的长时程研究, 有评估其预测参数和模型可靠性的实际作用, 也为应用中国卫星观测数据服务于地震预报等研究积累经验, 具有借鉴意义。  相似文献   

CTS-1E、CMG-3ESPC-120型地震计工作参数对比分析     

段绍鑫  乌尼尔  李晓东  张森  张小飞 《地震地磁观测与研究》2019,40(4):120-124

CTS-1E型、CMG-3ESPC-120型地震计安装架设在库尔勒地震台小泉沟观测点同一台基上，均使用EDAS-24GN型数据采集器进行实时数据采集，对比分析观测数据波形特征、地动噪声功率谱及动态范围等，明确2套地震计在实际观测中的性能差异，以便为地震监测数据分析及相关研究提供参考。  相似文献   

利用多源高度计资料提取南海低模态内潮能量     

马静怡  徐永生 《海洋与湖沼》2018,49(6):1169-1177

吕宋海峡由于剧烈变化的地形成为内潮产生的源地,内潮是海洋混合的重要原因。为了认知南海的内潮能通量分布,对南海的内潮有更好的理解,本文利用21世纪以来发射的多颗高度计卫星:J2、J1T、GFO以及EN,提取了吕宋海峡附近内潮的能通量。研究使用了调和分析和高通滤波等方法来提取第一模态内潮,主要提取K_1,K_2,M_2,N_2,O_1,P_1,Q_1和S_2八个分潮。同时结合WOA数据对能通量进行计算。结果表明,目标区域潮汐以全日分潮为主,所选区域的全日分潮中K_1所占比例最大;半日分潮中M_2分潮最强,而内潮的能通量则是M_2分潮所占最大,在吕宋海峡区域M_2能通量为6.45GW。内潮主要产生在地形变化剧烈的地方,海域的大部分地区内潮能量很小。在吕宋海峡中部,全日分潮能通量要小于南部地区,而半日分潮则有较大值。  相似文献